Grass Technology is the UK and Europe's market leader Zero Grazer and Slurry Tanker & Spreader Manufacturer. Premium as Standard is Grass Technology. Stand 5.
Products & Services
GRASS TECHNOLOGY ## NEW FOR 2024 ## GT130Grass Technology’s New GT130 “EXTRA CUT” is: DESIGNED FOR MANY MULTIPLE DAILY LOADS ON ALL TERRAIN WITHOUT DAMAGING GROUND & ALL WITH MINIMIZED MAINTENANCE & SERVICING DOWN TIME WHILST ACHIEVING LOWER LABOUR & FUEL COSTS. FEATURES: - Kuhn ALPINE 8FT DISC’ Mower. - 2.6m wide cutting width. (8 foot 6”.) - 130HP power requirement. - Elevator full width (2m – and top driven, hydraulically) - Push Frame 100mm x 60mm box section. (from 80x40mm on standard m/c’s) - 10mm Drawbar construction. (from 8mm on standard m/c’s) - 10 stud axles. (twin) - Air over Hydraulic Brakes. - 650/55/R22.5” BKT Tyres. - Mudguards and Mudflaps. - Automatic oiler. - Auto fill sensor. - Block greasing system. - Steel mower cover & skirts. (Folding Sides) - Rear camera system with colour monitor. - 2 x rear highway lights. - Floor rollers all bronzed bushed. - 60mm pivot pin on bronze bush insert. - Walterscheid Series 6 - P-line PTO shafts. LAUNCHING @ DAIRY TECH, Wed’s 7th Feb’ 2024. Stand 5 - outside right next to the TICKET OFFICE!
SLURRY TANKER.GRASS TECHNOLOGY GT 2,750G TANKER. Painted Green. Recessed for Low Centre of Gravity and Stability. Commercial Axle, Stepped 10 stud x 6″ (150mm) Square, Rated 50kph. Hydraulic Brakes (S – Cam, 420 x 180mm) with Auto Slack Adjusters, Load Sensing. Premium 800 / 65 R32” Tyres, Hi- Load Rated. 11,000l/m “Battioni” Vac Pump with Pump Protection & Manual Change Over. Wide Angle “Walterscheid” PTO Shaft. Full Acrylic Front Sight Tube fitted with Flush Valve, plus Rear Sight Bubble. 4 × 6″ Fill Points, One on Each Corner of the Tanker, 2 with Q/R Valve and Coupling. (2 Blanked Off) Access Hatch Point on Front Left Side. (30″) 6mm High Tensile S355 Grade Steel Barrel, Seem Welded Internally and Externally with Double Welded Implosion Rings, Full Anti-Roll Butterfly Baffle. Full Length Press Formed High Tensile Chassis with Sprung Drawbar and Fitted with Welded Eyelet Hitch. Rear Stone Trap. Rear Splash Plate. LED Lights, with Rear Hi-Level LED Strobe Beacon. Rear LED Work Lights. Hi-Vis Safety Strips. 15ft 6" Suction Hose. 6" Pipe Holders on the Both Tank Sides. Dribble Bar / Spreader Ready.